The face of the cell structure. This area has a sealant to keep contamination fixed to the surfaces.
A containment structure was also constructed around the cell face to prevent spread of contamination during the cleanup.
New manipulator arms had to be built to remove high activity cobalt-60 from two of the cells.
General view of the Service Area for the Hot Cells. Access to the Cells are through shielded doors seen here on the right.
Closer view of three of the Hot Cell doors.
Inside view of one of the Hot Cells after it has been decontaminated to safe levels.
View into the Hot Cell 4 process box. This process box is where the robot is being used. This picture shows some of the process tubing in the upper left corner that is contaminated with strontium. The robot is being used to access and remove all of the tubing.
View into the Hot Cell 4 process box. This angle shows the window allowing people to look in from the cell face.