|
|
|
| Aluminum |
Avaliable Formats |
| Advanced Anodes and Cathodes Utilized in
Energy-Efficient Aluminum Production Cells |
|
| Aluminum Carbothermic Technology |
|
| Automotive Aluminum Scrap Sorting |
|
| Coolant Characteristics and Control in Direct
Chill Casting Aluminum |
|
| Detection and Removal of Molten Salts from
Molten Aluminum Alloys |
|
| Development of a Novel Non-Consumable Anode
for Electrowinning Primary Aluminum |
|
| Development of a Rolling Process Design
Tool for Use in Improving Hot Roll Slab Recovery |
|
| Energy-Efficient Isothermal Melting (ITM)
of Aluminum |
|
| Energy-Efficient Manufacturing of Superior
Aluminum Extrusions |
|
| Gas Fluxing of Aluminum |
|
| High-Efficiency, High-Capacity, Low-NOx
Aluminum Melting Using
Oxygen-Enhanced Combustion |
|
| In-Situ Grain Refinement Process for Aluminum |
|
| Optimization of the Squeeze Casting Process
for Aluminum Alloy Parts |
|
| Potlining Additives |
|
| Prevention of Molten Aluminum-Water Explosions |
|
| Reduction of Annealing Times |
|
| Selective Adsorption |
|
| Spray Rolling Aluminum Strip |
|
| Surface Behavior of Aluminum Alloys Deformed
under Various Processing Conditions |
|
| Technology for Converting Spent Potliner
(SPL) to Useful Glass Fiber Products |
|
| Thermomechanical Processing of Aluminum
Alloys |
|
| Two-Phase Model for the Hot Deformation
of Highly-Alloyed Aluminum |
|
| Wettable Ceramic-Based Drained Cathode Technology
for Aluminum Electrolysis Cells |
|
Top of
the page
| Glass |
Avaliable Formats |
Development of a Process for the In-House
Recovery and Recycling of
Glass from Glass-Manufacturing Wastes |
|
Diagnostics and Modeling of High-Temperature
Corrosion of
Superstructure Refractories in Oxyfuel Glass Furnaces |
|
Dynamic Expert System Controls for Optimal
Oxyfuel Melter
Performance |
|
| Improved Refractories for Glass |
|
| Process Optimization Strategies,
Models, and Chemical Databases for
On-Line Coating of Float Glass |
|
Top
of the page
| Metal Casting |
Avaliable Formats |
| Die Life Extension: Composition and Heat Treating of Die
Steels |
|
| Die Life Extension: Design Factors |
|
Die Life Extension: Materials
for Critical Applications & Increased
Production Rates |
|
| Grain Refinement of Permanent Mold Cast
Copper-Base Alloys |
|
| Heat Treatment Procedure Qualification for
Steel Castings |
|
| Improved Design, Operation and Durability of Shot Sleeves |
|
| Macro-Inclusions Atlas |
|
| Natural Aging Aluminum Casting Alloys |
|
| Non-Incineration Treatment to Reduce Benzene
and VOC Emissions from Green Sand Molding Systems |
|
| Optimization of the Squeeze Casting Process for Aluminum
Alloy Parts |
|
| Performance Data to Increase Reuse of Foundry Byproducts |
|
| Prevention of Porosity in Iron Castings |
|
Reducing Energy Consumption and Variability in Steel Foundry
Operations |
|
Re-Engineering Casting Production Systems; Ergonomic Improvements
in Foundries |
|
| Service Performance of Welded Duplex Stainless Steel Castings |
|
| Thin Section Steel Casting |
|
| Yield Improvement and Defect Reduction in Steel Castings |
|
Top of
the page
| Mining |
Avaliable
Formats |
| 24-Channel Geophone Array for Horizontal
or Vertical Boreholes |
|
| Advanced Power and Control for Fuel Cell
Vehicles |
|
| Computerized Roof Bolt Design System |
|
| High Temperature Superconductors in Underground
Communications |
|
| Horizon Sensing |
|
| Imaging Ahead of Mining |
|
| Novel Dewatering Aids for Mineral and Coal
Fines |
|
| Robotics Technology for Improving Mining
Productivity |
|
| Selective Flocculation of Fine Mineral Particles |
|
| Wireless Mine-Wide Telecommunications Technology |
|
Top of
the page
|
